Loj: | |
---|---|
Thickness: | |
Density: | |
Khoom | |
Xim: | |
siv : | |
Daim Ntawv Thov: Kev kho deg : | |
Muaj: | |
Quantity: | |
GS Rigid PVC ntawv
Goldensign
PVC Rigid Sheet (PVC khoom Sheet)
Qhov project | Index |
Tensile zog (MPa) | ≥12 |
Shao hardness D | ≥55 |
Charpy notched cuam tshuam lub zog | ≥14 |
Elongation ntawm tawg (%) | ≥15 |
Cua sov qhov hloov pauv piv (%) | ≥12 |
Vicat softening point (%) | ± 2.0 |
Kev nqus dej (%) | <1.5 |
Softening point (℃) | ≥73 |
Flexural zog (Mpa) | ≥ 25 |
Tensile modulus ntawm elasticity (%) | ~800 |
Bending siv zog (MPA) | 12-18 |
Hluav taws kub | Self-Extinguishing tsawg dua 5 vib nas this |
Txheem loj | |
Dav | 1/1.22/1.3/1.5m |
Ntev | raws li koj qhov kev thov |
Thickness | 1-30 hli |
Qhov ntom | 1.4-1.6g / cm3 |
Xim | dawb, grey, dub |
Daim ntawv thov | Machining;Txiav, sawing, tig, drilling, npaj, milling, sib tsoo & screwing. |
Kev tsim kho;Stretch forming, therm-forming, nqus txoj kev, tshuab moulding, dabtsi yog khoov, folding & xuas nrig ntaus. | |
Vuam;Kub-gas, rhuab-cov cuab yeej & folding. | |
Kev tiv thaiv ib puag ncig, tshuaj lom neeg kev lag luam, metallurgy ntawm cov hlau tsis tshua muaj, kev ua haujlwm ntawm lub ntiaj teb tsis tshua muaj, kev kho dej, kev tsim kho kev lag luam thiab kev lag luam choj. |
Ntim:
2.Los yog raws li cov neeg siv khoom xav tau.
PVC Rigid Sheet (PVC khoom Sheet)
Qhov project | Index |
Tensile zog (MPa) | ≥12 |
Shao hardness D | ≥55 |
Charpy notched cuam tshuam lub zog | ≥14 |
Elongation ntawm tawg (%) | ≥15 |
Cua sov qhov hloov pauv piv (%) | ≥12 |
Vicat softening point (%) | ± 2.0 |
Kev nqus dej (%) | <1.5 |
Softening point (℃) | ≥73 |
Flexural zog (Mpa) | ≥ 25 |
Tensile modulus ntawm elasticity (%) | ~800 |
Bending siv zog (MPA) | 12-18 |
Hluav taws kub | Self-Extinguishing tsawg dua 5 vib nas this |
Txheem loj | |
Dav | 1/1.22/1.3/1.5m |
Ntev | raws li koj qhov kev thov |
Thickness | 1-30 hli |
Qhov ntom | 1.4-1.6g / cm3 |
Xim | dawb, grey, dub |
Daim ntawv thov | Machining;Txiav, sawing, tig, drilling, npaj, milling, sib tsoo & screwing. |
Kev tsim kho;Stretch forming, therm-forming, nqus txoj kev, tshuab moulding, dabtsi yog khoov, folding & xuas nrig ntaus. | |
Vuam;Kub-gas, rhuab-cov cuab yeej & folding. | |
Kev tiv thaiv ib puag ncig, tshuaj lom neeg kev lag luam, metallurgy ntawm cov hlau tsis tshua muaj, kev ua haujlwm ntawm lub ntiaj teb tsis tshua muaj, kev kho dej, kev tsim kho kev lag luam thiab kev lag luam choj. |
Ntim:
2.Los yog raws li cov neeg siv khoom xav tau.