PVC Foam Board Manufacturer & Supplier | Goldensayn we gɛt di taytul

Wetin Na PVC Fom Bɔd?

PVC foam bod , we dɛn kin kɔl bak Sintra bod, na layt ɛn lɔng matirial we dɛn mek wit polyvinyl chloride (PVC) resin we dɛn jɔyn wit kalsiɔm kabɔnɛt, stebyulayza, fom ɛjɛn, ɛn lɔbrik. Tru wan spɛshal fom prɔses, i de mek wan rigid yet wokable bod we fit fɔ difrɛn aplikeshɔn dɛn.
Wi PVC fom bod dɛn de insay difrɛn kayn dɛn, lɛk fri fom bod, Celuka fom bod, ɛn kɔ-ɛkstrud PVC bod.

Ki Ficha dɛn:

Watapruf; Faya nɔ de mek pɔsin nɔ gɛt faya; I nɔ gɛt bɛtɛ wet; I izi fɔ klin; Fɔ ebul fɔ chenj chenj; Ink-able we pɔsin kin yuz; I izi fɔ prosɛs; Gud skru fɔ ol trɛnk; Saund & ɔt insuleshɔn; Anti-kɔrɛshɔn; Anti-flaming; Fɔ kil insɛf; I nɔ de mek wata wet; Nɔto pɔyzin; ɛn ɔda tin dɛn.

Aplikeshɔn:

PVC fom bod de yuz bɔku bɔku wan fɔ sayn, kabinɛt mek, intɛriɔ dɛkɔreshɔn, industrial fabrikeshɔn, ɛn transpɔt sɔlvishɔn bikɔs ɔf in fayn fayn versatility ɛn pefɔmɛns.

RID MƆ TIN DƐN

Ki Fizik Prɔpati dɛn

Land	Valyu	Land	Valyu
Densiti fɔ di wok (g/cm3) .	0.35 – 0.90. Di wan dɛn we de wok	Shore Hardness (D-shape) we de mek di wɔl gɛt .	45 – 80. Di wan dɛn we de wok
Tensile Strεngth (MPa) we yu kin yuz.	12 – 20, ɛn 20	Elongashɔn na Brek (%) .	15 – 20. Di wan dɛn we de wok
Impakt Strɔng (kJ/m2) .	8 – 15. Di wan dɛn we de wok	Vicat Softening Point (°C) we yu kin yuz fɔ mek yu go ebul fɔ du sɔntin.	73 – 76. Di wan dɛn we de wok
Dimɛnshɔnal Varieshɔn Rɛshɔn (%) fɔ di ɔt .	2	Haydroskɔpisiti (%) 1.1.	<= 1. Na wan
Bɛndin Strɔng (MPa) .	12 – 18, ɛn di ɔda wan dɛn	Modulus of Elasticity in Statik Bɛndin (MPa) .	800 – 900. Di wan dɛn we de wok
Wata Absɔpshɔn (%) .	<= 1. Na wan	Skru Holding Strɔng (N) .	>= 800 pipul dɛn
Faya Resistɛns	Self-extinguish tεm < 5 sek

Tayp dɛn fɔ PVC Fom Bɔd dɛn

PVC Fom Bod kin sheb to PVC fri fom bod, PVC celuka bod, ɛn PVC kɔ-ɛkstrud bod.

PVC Fri Fom Shit: PVC fri fom shit na PVC fom shit, we dɛn mek bay tri-rɔla layn prɔses ɛn dɛn mek am bay fri fom. I gɛt gud taf ɛn fayn tɛkstɔr pan di surface, ɛn dɛn kin yuz am bɔku bɔku wan fɔ advatayz, UV printin, ɛn skrin printin.

PVC Sɛluka Bɔd: PVC kɔ-ɛkstrud shit na kɔmpɔzit shit matirial we dɛn mek wit polyvinyl klorayd (PVC) tru wan kɔ-ɛkstrud prɔses. I gɛt tri layers, wit di layt dɛn we de ɔp ɛn dɔŋ we rili at, ɛn di say we de ɔp de glos ɛn i nɔ de skrach.

PVC Ko-ɛkstrud Bɔd: Watapruf; Fayapruf,I fayn fɔ batrum ɛn kichin kabinɛt, ɔfis fɔnicha, ɛn intɛriɔ dɛkɔreshɔn
Kɔlɔ PVC Fom Bɔd: I de insay difrɛn kɔlɔ dɛn, i fayn fɔ kriyaytiv advatayzmɛnt, intɛriɔ dɛkɔreshɔn, ɛn fɔnicha aplikeshɔn.

PVC Celuka Bɔd

Send inkwyuizhɔ

Wetin Mek Yu Pik Goldensign PVC Fom Bɔd?

Sins 2004, Savis 120+ Kɔntri dɛn

●High-Density PVC Foam Board for Printing & Cabinets
Wi PVC fom bod de gi strɔng strɔkchɔ ɛn klin edj, we de kip ɛvri PVC fom shit flat ɛn fɔ de te.
● Precise Thickness & Smooth Surface
Ɛni PVC fom bod de kalibrayt fɔ lɔw tolɛreshɔn ɛn stebul printin, laminating, ɛn CNC rizɔlt.
● Ɛkspɔt-Lɛvɛl Pakɛj fɔ Sef Globɛl Delivri
Riinfɔs kɔna ɛn mɔstɔ-rɛsistant wrap de protɛkt ɔl di PVC fom sheet dɛn we dɛn de ship di glob ɔl.
● OEM / ODM Sɔlwɛshɔn fɔ Yu Maket Nid
Kastɔm tik, density, saiz, hadnɛs, ɛn kɔlɔ fɔ mach yu makit ɔ prodakshɔn nid.
● Sɛtifiket PVC Fom Bɔd Matirial (RoHS, REACH, SGS,ISO,CE)
Klin, sef PVC fom shit we mit di wɔlwide import standad.

RID MƆ TIN DƐN

PVC Foam Bod Spesifikasi

Tayp fɔ Prodakt	Di sayz dɛn (mm) .	Tik we i tik (mm) .	Densiti (g/cm3) we yu kin du.
PVC fri foam sheet	1220 × 2440 1560 × 3050 2050 × 3050	1 – 8 (de aplay to ɔl di saiz dɛn)	0.5 – 1.0 (de aplay to ɔl di saiz dɛn)
PVC Celuka Bɔd	1220 × 2440 1560 × 3050 2050 × 3050	3 – 40 (fɔ 1220×2440) 4 – 23 (fɔ 1560×3050 ɛn 2050×3050)	0.35 – 1.0 (fɔ 1220×2440) 0.45 – 0.9 (fɔ 1560×3050 ɛn 2050×3050)
PVC Ko-ɛkstrud Bɔd	1220 × 2440, yu kin yuz am	3 – 30, ɛn 30	0.5 – 0.9

Kɔlɔ:wayt,blak,blu,rɛd,yɔlɔ | Di saiz ɛn kɔlɔ we dɛn kɔstɔmayt de bak.

Aplikeshɔn dɛn fɔ PVC Fom Bɔd

PVC Fri Fom Bod Aplikeshɔn dɛn:
Saynbɔd, ɛgzibishin displei, bod dɛn we dɛn print na skrin, bod dɛn we dɛn print dijital, panɛl dɛn we dɛn kin rayt, fɔ put foto, fɔ mek mɔdel ɛn fɔ mek kraft.

PVC Co-extruded Board Applications:
Kichin ɛn batrum kabinɛt dɛn; Di we aw dɛn de drɛs insay di os; Di say dɛn we dɛn kin put ɛgzibit; Windo & wɔl dɛn fɔ bildin dɛn we pipul dɛn kin de; Ɔfis ɛn pɔblik ples dɛn; Siling bod dɛn; Bot dɛn we dɛn kin yuz; Plɛn dɛn; Bɔs dɛn.

PVC Celuka Bod Aplikeshɔn dɛn:
Kichin ɛn batrum kabinɛt dɛn; Di we aw dɛn de drɛs insay di os; Di say dɛn we dɛn kin put ɛgzibit; Windo & wɔl dɛn fɔ bildin dɛn we pipul dɛn kin de; Ɔfis ɛn pɔblik ples dɛn; Siling bod dɛn; Bot dɛn we dɛn kin yuz; Plɛn dɛn; Bɔs dɛn.

KONTAKT WI

Advantej dɛn fɔ Goldensign PVC Fom Bɔd

I nɔ go ambɔg di envayrɔmɛnt

Lid-fri, nɔ gɛt pɔyzin, ɛn 100% risaykul.

Goldensign PVC fom bod na enjinɛri wit wan eko-friɛndli fɔmyulashɔn,Wi advans manufakchurin prɔses de minimiz west ɛn ɛnaji kɔnsɔmshɔn, mek shɔ se yu gɛt grɛn futprin frɔm di faktri to yu fayn aplikeshɔn.

Ay Kwaliti ɛn I izi fɔ Prosɛs

Lɔng Savis Layf:PVC nɔ de rɔtin, swel, ɔ sɔlv na say dɛn we gɛt bɔku bɔku wata.
Layt bɔt Strɔng:I izi fɔ transpɔt ɛn instɔl we yu de kip di strɔkchɔral intɛgriti.
Smooth Printing Surface:Ink adhesion na fayn tin; di kɔlɔ dɛn kin tan lɛk se dɛn gɛt layf ɛn dɛn kin te.

Fɔs klas savis

Bɔku no ɛn ɛkspiriɛns bɔt wɛbsayt prɔmoshɔn,ɔpreshɔn kin sheb wit yu.Fɔ bɛtɛ ridyus yu ɔpreshɔnal risk ɛn kɔst,Wi kin bil patnaship wit yu,togɛda fɔ ɔpreshɔn di wɛbsayt.

Wi Sɛtifiket dɛn

Goldensign pvc fom bord sertifikeshɔn1208-1

Prodakshɔn Kapabiliti fɔ Goldensign Faktɔri

15+ PVC Foam Bod Prodakshɔn Layn
As wan dediket PVC fom bod manifakta, wi de ɔpreshɔn ova 15 advans prodakshɔn layn dɛn ɛn kɔntinyu fɔ ɔpgrɛd wi manufakchurin kapasiti fɔ deliv ay-kwaliti PVC fom bod prodak.

Mɔnt Autput
Wi big-big PVC fom bod prodakshɔn kapasiti de sɔpɔt ay-volyum ɔda ɛn mek shɔ se wan stebul, kɔnsistɛns saplai fɔ di glob distribyushɔn.
Strikt Kwaliti Kɔntrol
Dɛn de inspɛkt ɛvri PVC fom bod shit fɔ:Prɛsis dimɛnshɔn;Kɔlɔ kɔnsistɛns;Sɔfayz klin;Tiknɛs akkuracy;Densiti distribyushɔn
Prɛmiɔm Raw Matirial Sɛlɛkshɔn
As pɔshɔnal PVC fom bod manifakta, wi de yuz ɔl di ay-grɛd PVC rɛsin ɛn sɛtifiket aditiv fɔ mek shɔ se stebul kwaliti ɛn lɔng tɛm durabiliti.
Globɛl Ɛkspɔt Ɛkspiriɛns
Wit ia ɛkspiriɛns fɔ ɛkspɔt PVC fom bod to intanashɔnal makit, wi de gi rili, on-taym delivri ɛn kɔnsistɛns prodak pefɔmɛns.

FAQ – PVC Fom Bod Bayin Gayd

Q A kin ɔda sampul fɔ tɛst di kwaliti?

A Na tru se! Wi kin gi 1-20 pis fri sampul fɔ kwaliti tɛst. Yu jɔs nid fɔ kɔba di kɔst fɔ ship. If yu mek ɔda, dɛn go pul di shiping fi frɔm di las invɔys.
Q Aw a go gɛt kɔrɛkt shiping kot?

A Duya gi yu prɔdak rikwaymɛnt ɛn ditayla delivri adrɛs. Wi go gi yu kot ɛn kɔst kɔmpiashɔn fɔ difrɛn we dɛn fɔ ship.
Q Us we dɛn fɔ pe yu kin aksept?

A Wi de aksept difrɛn we dɛn fɔ pe lɛk L/C, T/T, Escrow, Visa, Western Union, ɛn MoneyGram. Fɔ ɔda tin dɛn we yu go ebul fɔ du, duya kɔntakt wi fɔ tɔk bɔt.
Q Us pak opshɔn dɛn yu de gi?

A Wi standad pakej na PE wrap, ɛn wi de sɔpɔt kɔstɔm pak bak fɔ OEM klaynt dɛn. Duya mek wi no wetin yu nid.
Q Yu kin kɔstɔmayz prɔdak dɛn?

A Yɛs. Duya sheb yu kɔstɔmayshɔn rikwaymɛnt dɛn, ɛn wi go gi yu pɔsnalayz sɔlvishɔn dɛn.

Get a Quote fɔ PVC Foam Bɔd

Wi go ansa yu kwik kwik wan ɛn gi yu wan kɔstɔm we yu want fɔ no bɔt bay wetin yu nid.
If i pɔsibul, duya mek wi no di ditel dɛn we de dɔŋ ya fɔ yu PVC Fom Bɔd:Sayz,Tiknɛs,Dɛnsiti,Kwantiti,Aplikeshɔn,Destinashɔn kɔntri