Fɛɛrɛko siratigɛ la, fɛnw sugandili kama
Ni aw bɛ fomu pankurunw sugandi jɔli kama, minɛnw, taamasiyɛnw, walima kɔnɔna porozɛw kama, WPC Celuka fomu pankurun ni PVC fomu pankurun bɛ jateminɛ tuma caman na kɛrɛfɛ.
Fɛɛrɛko siratigɛ la, o fɛnw sinsinnen bɛ sigicogo sariyakolow kan minnu tɛ kelen ye. U dacogo, u farikolo cogoyaw, ani u baarakɛcogo faamuyali bɛ dɛmɛ ka faratiw dɔgɔya poroze bolodacogo senfɛ. Nin barokun bɛ sinsin fɛɛrɛko baarakɛcogo kan sanni ka sinsin fɛn dilannenw diyabɔli kan.
1. Fɛn minnu bɛ kɛ ka ɲɛsin baarakɛcogo ma, olu sugandili
WPC Celuka foam board sugandi ni:
Dekoratif yecogo nafa ka bon kosɛbɛ
Lɔgɔ texture (jiri texture) de ka ɲi
So kɔnɔ minɛnw walima kogow bɛ o baara la
PVC fomu board sugandi ni:
Dimensions stabilité (yɔrɔ sabatili) nafa ka bon kosɛbɛ
Sɛbɛnni walima taamasiyɛnw de wajibiyalen don
Tasuma baarakɛcogo bɛ labɛn
A ka kan ka kɛ cogo kelen na waati jan kɔnɔ
2. Fɛnɲɛnɛmaw labɛncogo ani u jɔcogo hakilina
WPC Celuka Mousse Baarakɛminɛnw
WPC (Wood Plastic Composite) Celuka fomu board bɛ dilan ni ninnu faralen ye ɲɔgɔn kan:
Celuka bɔli waati la, jiribolo bɛ don PVC matirili kɔnɔ, ka kɛ selilu tilancɛ ye min sanfɛla ka bon.
Fɛɛrɛko siratigɛ la:
Surface gɛlɛya ɲɛnabɔlen don
Lɔgɔ-ɲɔgɔnna tactile feedback
Fɛnɲɛnɛma anisotropi min ka bon dɔɔni
PVC fomu board bɛ dilan ni:
Kɔnɔna jɔcogo ye fomu ye min bɛ kɛ ni selilabana dagalen ye, min kɔnɔfɛnw tɛ fɛnɲɛnamafagalanw ye.
Fɛɛrɛko siratigɛ la:
Isotrope (yɔrɔ kelen-kelen bɛɛ) jɔcogo
Dimensionnel consistance (daɲɛ kɔrɔma) min ka bon
Taamacogo kuntaalajan min bɛ se ka fɔ ka ɲɛ
3. Fɛɛrɛbɔcogo danmadɔw (Reference Range) .
| Suguya |
Minɛn |
WPC Celuka Mousse Baarakɛminɛnw |
PVC Foam Board ye |
Kuma surun min bɛ tali kɛ ɲɔgɔn na |
| Minɛ |
Kɛ fɛnw |
PVC + jiri fibre composite |
Fomu PVC saniyalen |
WPC bɛ a yɛrɛ minɛ ka caya i n’a fɔ jiri |
|
Jiginni cogoya min bɛ kɛ cogoya la |
Structural / mebɛriw ka grade |
Dekoratif / industriel grade |
Aplikasi sinsinnan danfaralenw |
| Dimensions (yɔrɔ) minnu bɛ yen |
A janya (mm) . |
5–25nan na |
A ka c’a la, 1–30 |
A bɛ se ka suma ni ɲɔgɔn ye |
|
Sɛbɛn hakɛ min bɛ kɛ ka kɛɲɛ ni sariya ye |
1220 × 2440 milimɛtɛrɛ |
1220 × 2440 mm (a ka ca a la) . |
O hakɛ kelen min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, o bɛ sɔrɔ |
| Hakɛ |
Hakɛ |
≤ kilogaramu 800/m³ |
0,35–0,90 g/cm³ |
PVC bɛ se ka kɛ fɛn ye min ka nɔgɔn |
| Mekaniki jogo . |
Sɛgɛsɛgɛli fanga (MPa) . |
≥ 10 ye |
12–20nan na |
PVC ka bon |
|
Janya waati lafiɲɛbɔ waati (%) . |
— |
15–20nan na |
PVC ka teli ka se ka wuli |
|
Kɔrɔta fanga (MPa) . |
≥ 21 ye |
12–18nan na |
WPC barika ka bon kosɛbɛ |
|
Module de élasticité (MPa) ye . |
≥ 600 ye |
800–900 cɛ |
PVC ka ca ni elastic ye |
|
Kɔnɔnafili fanga (kJ/m²) . |
≥ 13 ye |
8–15nan na |
Ɲɔgɔn |
| Surface & Labɛnni |
Kɔgɔjida gɛlɛya (D) . |
≥ 55 ye |
45–80 kɔnɔ |
WPC sabatilen ni gɛlɛn |
|
Vis minɛ fanga (N) . |
≥ 800 ye |
≥ 800 ye |
O jate kelen, WPC bɛ a yɛrɛ jate jiri-ko ye ka tɛmɛ |
| Sumaya-yɔrɔ-ko |
Vicat ka nɔgɔya yɔrɔ |
≥ 70 °C ye |
73–76 °C ye |
PVC ka bon dɔɔni |
|
So funteni hakɛ caman yeli (%) . |
≥ 10 ye |
2 |
PVC ka ca ni dimensionment stable ye |
|
Muɲuli hakɛlama |
±2% ye . |
A ka dɔgɔn |
PVC ka ɲɛfɔli ka ca |
| Jiko kunbɛnni |
Ji minɛcogo (%) . |
≤ 1,0 ye |
≤ 1,0 ye |
Kan |
| Tasuma-fanga-baarakɛcogo |
Tasuma kɛlɛli |
A ma ɲɛfɔ |
Yɛrɛfaga < 5 s |
Nafa jɛlen bɛ PVC la |
| Yecogo |
Ɲɛ |
I n’a fɔ a ɲininen bɛ cogo min na |
Standard blanc / min bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye |
A bɛ se ka suma ni ɲɔgɔn ye |
WPC Celuka ka pankurun mousse:
Fanga ni gɛlɛya ka bon
Stable screw-holding seko ni dɔnko
A bɛnnen don mebɛriw, kabiniw, yɔrɔw, ani jɔli yɔrɔw ma
PVC mousse pankurun:
A ka nɔgɔn ani a bonya bɛ sabati
A bɛ funteni kɛlɛ ani a tɛ tasuma bɔ
A bɛnnen don piblisite pankurunw ma, UV sɛbɛnni, kabiniw, minɛnw, ani kɔnɔna masirili kama
4. Baara kɛcogo jogo: Nafa ni danyɔrɔ
WPC Celuka Mousse Baarakɛminɛnw
Nafa minnu bɛ a la:
Surface texture i n’a fɔ jiri
Ji tɛ don a la, a tɛ se ka fɛnɲɛnamaw kɛlɛ, a tɛ se ka nɔgɔ bɔ
Formaldehyde tɛ a la; nɔrɔlan si man kan ka kɛ
A bɛ se ka sɔgɔ ni nɛgɛ ye; yiri-baara-kɛ-minɛn
A bɛ sigida lakana ani a bɛ se ka segin ka kɛ fɛn wɛrɛ ye
Danyɔrɔw:
A bɛ Sɔ̀rɔ nɛnɛ na k’a sababu Kɛ jirimugu hakɛ ye
Dimensions sabatili bɛ se ka nɔ bila sigidaw la minnu nɛnɛ ka bon waati jan kɔnɔ
Surface tɛ ɲuman ye sɛbɛnni kɛcogo ɲuman na
Tasuma-fagalan baarakɛcogo danma
Nafa minnu bɛ a la:
100% ji tɛ don a la ani ji tɛ don a la
Tasuma-fagalan ni yɛrɛfaga kɛcogo sabatilen
Yɔrɔ nɔgɔlen min bɛnnen don sɛbɛnni ni lamini ma
Density bɛ sabati ani a bɛ se ka deformation (dɔgɔyali) kɛlɛ
Seko ɲuman min bɛ se ka kuru minɛ
CNC baarakɛcogo nɔgɔn, grooving, ani carving
Danyɔrɔw:
5. Baarakɛcogo minnu tɛ kelen ye
Porozɛ minnu bɛnnen don kosɛbɛ WPC Celuka foam board ma:
Mebɛriw ka pannew
Panneau de mur décorative
So kɔnɔ walima kɛnɛma tilancɛ baarakɛcogo
Yɔrɔ min na a ka kan ka kɛ i n’a fɔ jiri
Sinsin kɛli yecogo ni magali ko kɛlenw kan
Porozɛ minnu bɛnnen don kosɛbɛ PVC fomu board ma:
Piblisite taamasiyɛnw ni jiracogo
Kabiniw, yɔrɔw, ani kɔnɔna jɔli pankurunw
Industriw ka baarakɛcogo baarakɛcogo
Porozɛ minnu bɛ sabatili ni ɲɔgɔndan kuntaalajan de wajibiya
Aplikasi minnu bɛ tasuma-fagalan walima sɛbɛnnikɛlan wajibiyalenw na
6. Miiriya jugu minnu bɛ sɔrɔ tuma caman na: U bɛ ɲɔgɔn dafa, u tɛ se ka bila u nɔ na
Client dɔw bɛ ɲininkali kɛ ko:
O ɲininkaliw bɛ faamuyabaliya jira. Tiɲɛ na:
Fɛn jugu sugandili man teli ka kɛ baarakɛcogo dafabali ye—a bɛ tali kɛ baarakɛcogo laɲinibaliya la.
7. Goldensign jɔyɔrɔ: Ka ɲɛnabɔli hakilitigiw di
Goldensign bɛ fɛnw dilan:
O b’a to an bɛ se ka laadilikanw di ka da poroze ka ɲininiw kan sanni ka kunnafoni kɛrɛnkɛrɛnnen dɔ fɛ, k’an sinsin ninnu kan:
Client caman bɛ WPC ni PVC fila bɛɛ kɔrɔbɔ poroze daminɛ waati la, wa sugandili laban bɛ kɛ ka da baarakɛcogo lakikaw kan, a tɛ kɛ fɛn ɲɛfɔlenw dɔrɔn de kan.
8. I bɛ se ka sugandili ɲuman kɛ cogo min na i ka poroze kama
I ka nin ɲininkali ninnu lajɛ:
Yala o fɛn bɛna kɛ kɛnɛma walima nɛnɛba bɛ yɔrɔ minnu na waati jan kɔnɔ wa?
Yala sɛbɛnni walima surface lamination bɛna kɛ o la wa?
Yala fɔlɔfɔlɔ ye dekorasiyɔn nɔ ye wa walima jɔli sabatili?
Yala fɛnw dicogo ka kan ka kɛ fɛnba ye, min bɛ mɛn sen na wa?
Jaabiw bɛna i bilasira ka taa yɔrɔ la min bɛnnen don kosɛbɛ.
Aw mago bɛ dɛmɛ na fɛɛrɛbɔ la walasa ka fɛnw sugandi wa?
Ni aw bɛ PVC walima WPC Celuka foam board jateminɛ porozɛ dɔ kama, aw bɛ aw ka sigida, aw ka bonya, a girinya, ani a labatoli wajibiyalenw fɔ an ye.
Goldensign ka fɛɛrɛbɔ jɛkulu bɛ se ka dɛmɛ don ni ninnu ye:
Fɛnɲɛnɛmaw bɛnkan
Paramɛtiriw dantigɛli
Misali sɛgɛsɛgɛli dɛmɛni
Aw ye kuma an fɛ walasa ka baro kɛ aw ka porozɛ kan ni fɛn dilannikɛla ye min bɛ o fɛn fila bɛɛ faamu.
