Wetin na PVC Fom Bɔd?

PVC Foam Board na bod we layt, saf ɛn we kin te. Bikɔs ɔf in flatnɛs, brayt, smol sɔfays, i fayn fɔ pik fɔ kɔnstrɔkshɔn, akitɛkɛt, transpɔteshɔn, sayn & fɔnicha . I men matirial na PVC resin paoda, aktivet layt kalsiɔm kabɔnɛt ɛn ɔda fɔm aditiv dɛn. Di bod gɛt wan yunifom klosed sɛl strɔkchɔ ɛn bɔku prɔpati dɛn.

Akɔdin to difrɛn aplikeshɔn dɛn, manifakta dɛn de prodyuz PVC bod wit tik we 3-24mm tik, 1220x2440mm(4*8ft) saiz, ɛn jenɛral density 0.30-0.90g/cm3. Wait na di kɔlɔ we dɛn kin yuz pas ɔl na PVC bod. Tri prodakshɔn teknɔlɔji dɛn de na PVC prodakshɔn industri: fri we, Celuka we ɛn kɔ-ɛkstrushɔn we. Ɛni we fɔ du tin gɛt in yon spɛshal prɔpati ɛn aw fɔ yuz am.

Aw Bɔku Advantej ɛn Bɛnifit dɛn PVC Fom Bɔd Gɛt?

1. Strɔng ɛn i kin te

PVC bod strɔng ɛn i kin te bikɔs di strɔkchɔ fɔ in kɔmpɔnɛnt mɔlyul dɛn.

2. Nɔ-Toxic

PVC fom bod dɛn na tin dɛn we nɔ gɛt pɔyzin ɛn we nɔ de pwɛl di wɔl we nɔ gɛt lid, barium, zink, ɛn kadmiɔm.

3. Flammability: i kin kil insɛf

PVC bod kin mek faya nɔ bɔn fayn fayn wan kɔmpia to plai wud bod.

4. I nɔ de mek wata pas

PVC fom bod na wata-resistant bikɔs ɔf in kɔmpɔzishɔn.

5. Anti-Kɔrɔshɔn

PVC nɔ de riak wit kemikal. Dis kin mek in kɔlɔ ɛn stet nɔ pwɛl ɛn i kin mek di bɔd nɔ chenj.

6. I nɔ de mek sawnd

Di bod nɔ kin ebul fɔ inshɔl di sawnd ɔlsay, bɔt i kin ebul fɔ stɔp di sawnd transmishɔn fayn fayn wan.

7. Ilɛktrik insultin

PVC na ilɛktrik insultin matirial, we de mek am fayn fɔ pik insay transpɔreshɔn.

8. I izi fɔ mek ɛn peint am

PVC kin izi fɔ kɔt to ɛni shep ɔ peint to ɛni kɔlɔ fɔ fit wetin yu nid.

9. Lɔng layf span

PVC nɔ de riak wit kemikal dɛn na humid envayrɔmɛnt. So in layf span lɔng pas ɔda bod dɛn.

10. Sev kɔst

Dɛn bod ya nɔ nid ɛni ɛkstra mentenɛns we yu de yuz dɛn.

Wetin Dɛn De Yuz PVC fom Bɔd Fɔ?

1. Kɔnstrɔkshɔn & Akitekchɔ

2. Panɛl dɛn we de na do na di wɔl

3. Patishɔn bɔd dɛn

4. Garaj domɔt dɛn

5. Kɔmishɔn, rɛzidɛshɔnal, pɔblik ɛn ɔfis bildin dɛn